News
Wiper Arm Types Explained: Hook, Pinch Tab and Bayonet Fittings
Every week a wholesaler writes to us with the same complaint: the wiper blades we shipped will not click onto the customer’s wiper arm. In most cases the blade is not defective at all. Wiper arms are not universal, and a 24-inch blade that fits one car may not fit another even when the length is identical. Three fittings cover most of the market.

Three Wiper Arm Types You Will Meet Most
Hook, or U-hook. The most common fitting on passenger cars and light commercial vehicles. The arm ends in a curved metal hook, usually 9 x 3 mm or 9 x 4 mm. The blade carries a plastic saddle that slides into the hook and locks when the arm is folded down. Hook arms are standard on most Japanese, Korean and American models built from the 1990s onward.
Pinch tab. The arm ends in a flat, rigid tab with a small locating hole. The blade slides on and two side buttons press in to lock it. Pinch tab fittings are common on European vehicles and are often mistaken for a hook in photographs.
Bayonet. The arm is a straight rod ending in a small pin. The blade has a narrow channel that slides along the rod until the pin seats in a notch. Bayonet arms appear on older European models and some vans.
How to Identify an Arm in Ten Seconds
- Look at the very end of the arm, not at the blade. A curved hook, a flat tab or a straight rod identifies the family at once.
- Measure the hook width with a caliper. 9 x 3 mm and 9 x 4 mm blades are not interchangeable.
- Check the old blade for a locking clip or side buttons; this confirms which fitting it belongs to.
- Photograph the arm end, not the whole windscreen, when asking a supplier to confirm fitment.
Why Wrong Fits Reach the Warehouse
Most errors start at quotation. A buyer quotes only a model name and year, while the same year can carry two different arms depending on trim and market. Others come from non-original arms fitted earlier. Two habits prevent almost all of it: quote the blade reference number where possible, and keep one sample of each fitting on the counter for staff to compare before packing.
Rear wipers are a separate case. On most hatchbacks, SUVs and vans the rear blade and arm are supplied as a matched assembly, because the arm carries its own spring, spindle spline and cover. A rear blade from another model rarely fits, so rear parts should be ordered as a complete set. Our wiper blade range is organised model by model this way, for example the Nissan Qashqai rear wiper blade and arm assembly.
Stocking Advice for Wholesalers
- Group references by fitting type first and model second.
- Keep a small box of adapters and clips; a large share of returns is solved by a low-cost accessory.
- Print the arm type on the box label, not only the model, to avoid mix-ups in mixed cartons.
- In hot, dusty markets wiper rubber hardens quickly, so rotate stock by season.
Building a wiper programme? Send us the arm types and reference numbers you need and we will check them against our range — details on our contact page.
About KEYFLY LIMITED
KEYFLY LIMITED (www.chinakeyfly.com) is a professional exporter of automotive spare parts — air filters, car locks and ignition switches, brake slack adjusters, body parts and wiper blades — serving distributors and wholesalers in Africa, South America, and Southeast Asia. Contact: vicky@chinakeyfly.com






